Share:
MS200 Screw Valve + 300ml Cylinder Glue Dispenser (MS200-300ML-QG)
Category:
GLUE DISPENSING MACHINE
Model :
- MS200-300ML-QG
Features :
1. Volumetric fluid transport, the flow rate is not affected by pressure changes.
2. Closed-loop motor drive, high output accuracy.
3. The stator has excellent corrosion resistance and particle resistance.
4. The rotor is made of high-hardness material, which makes it more wear-resistant.
5. Suitable for colloids with viscosity ranging from low to high.
6. Monitoring and adjusting the A/B ratio to ensure no dripping or stringing issues during dispensing.
7. Supports full data monitoring, covering pressure, temperature, adhesive volume, etc.
8. Supports time mode, automatic mode, volume mode, automatic dispensing, and ratio control.
Applications :
- Suitable for two-component fluids such as acrylic, epoxy, and thermal conductive paste: easily achieves processes such as ceramic bonding, metal bonding, non-metal bonding, magnetic bonding, sealing, and thermal conduction.
Technical Paremters :
| Input pressure | 0~6 bar |
| Maximum output pressure | 20 bar |
| Self-sealing ability | ≈2 bar |
| Output accuracy | ±1% |
| Flow | Max. 18 ml/min |
| Minimum dispensing amount | 0.01ml |
| Fluid viscosity | Medium to high viscosity fluids |
| Rotor material | SUS304/SUS316L/Zirconium Oxide Ceramics |
| Stator material | FFKM/PU/EPDM/NBR |
| Wetted parts material | SUS304/POM/PTFE/PEEK/AL |
| Feed port | ะค6mm tubing, Luer fitting, G1/8 thread |
| Discharge port | Standard mixing tube base (1:1/1:2/1:10) |
| Mixing ratio | 1:1~100:1 |
| Dispensing consistency | >99% |
Inquiry - MS200 Screw Valve + 300ml Cylinder Glue Dispenser (MS200-300ML-QG)
View more
GLUE DISPENSING MACHINE
